D-PE-FN-01 Dumps Updated Jun 25, 2026 Practice Test and 103 unique questions
2026 Latest 100% Exam Passing Ratio - D-PE-FN-01 Dumps PDF
NEW QUESTION # 11
What is s backup process?
- A. Using server technologies to transmit data from one computer node to another
- B. Copying files to a secondary site for preservation in case of equipment failure of other catastrophe
- C. Capturing historical records used for further reference and is not actively used by the server
- D. Moving data that is no longer activity used to a separate storage device, for long-term retention
Answer: B
NEW QUESTION # 12
Where in the iDRAC GUI can the recording of the last three boot cycles of a Dell EMC PowerEdge server be found?
- A. Maintenance > Troubleshooting
- B. Troubleshooting > Lifecycle Log
- C. Maintenance > Diagnostics
- D. Troubleshooting > SupportAssist
Answer: A
NEW QUESTION # 13
What is indicated by a blinking blue system ID LED on a PowerEdge server?
- A. The system is turned off
- B. The system is experiencing a fault
- C. The System ID mode is active
- D. The system is in fail-safe mode
Answer: C
Explanation:
A blinking blue system ID LED on a PowerEdge server indicates that the System ID mode is active, typically used to identify a specific server in a rack for maintenance or troubleshooting. This is distinct from fail-safe mode, faults (often amber LEDs), or power-off states. Exact extract: "Describe maintenance functions, shutdowns, reboots of a PowerEdge Server... Explain the power distribution considerations." Reference: Dell PowerEdge Foundations v2 Exam Description (D-PE-FN-01), Topic: Maintenance (18%).
NEW QUESTION # 14
Which RAID level is recommended for high speed data access and maximum storage capacity?
- A. RAID 5
- B. RAID 1
- C. RAID 0
- D. RAID 6
Answer: C
NEW QUESTION # 15
What is the amount of hard drives request per RAID set, when configure RAID 50?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 16
An administrator must gracefully shut down an ESXi host. Which interfaces provide options for initiating this shutdown? Identify the interfaces from which an ESXi host shutdown can be initiated.
- A. CLI commands, Direct Console User Interface (DCUI), vSphere client and web client
- B. Solely from the Direct Console User Interface (DCUI) of ESXi
- C. Only through vSphere client and web client
- D. Exclusively using CLI commands on the ESXi host
Answer: A
Explanation:
Comprehensive and Detailed Explanation From Exact Extracts: Gracefully shutting down an ESXi host on a PowerEdge server can be performed through multiple interfaces: CLI commands (via SSH or console), the Direct Console User Interface (DCUI) for direct hardware access, and vSphere client or web client for remote management. This flexibility ensures administrators can choose the most convenient method for maintenance tasks. Exclusively using CLI or DCUI limits options, and vSphere-only access ignores direct methods. Exact extract: "Describe maintenance functions, shutdowns, reboots of a PowerEdge Server... Compare the PowerEdge Servers management applications, utilities, and licensing." Reference: Dell PowerEdge Foundations v2 Exam Description (D-PE-FN-01), Topic: Server Management (18%).
NEW QUESTION # 17
Which component within an External Switch configuration helps maintain VM network configurations despite changes to the physical pNIC?
- A. pNICs
- B. vNICs
- C. PVLANs
- D. vEthernet
Answer: B
NEW QUESTION # 18
A data center is designed with cold aisle containment. How are cold aisles used in this design to manage server temperatures?
- A. Recirculate hot air within the cold aisle to preheat intake air.
- B. Isolate the cold aisle to prevent any airflow from the hot aisle.
- C. Pump cold air into the cold aisle for server intake.
- D. Direct hot exhaust air from the servers into the cold aisle.
Answer: C
Explanation:
In cold aisle containment designs, cold aisles are used to supply chilled air directly to server intakes by pumping cold air from air handlers or CRAC units into the enclosed cold aisle, ensuring efficient cooling and preventing mixing with hot exhaust air. This isolation improves energy efficiency and maintains optimal server temperatures. Directing hot air into the cold aisle or recirculating it would increase temperatures, defeating the purpose. Containment focuses on separating airflows for better thermal management in PowerEdge server deployments. Exact extract: "Explain the cooling and thermal considerations in PowerEdge Servers (Direct Liquid Cooling, Immersion Cooling, Air Cooling)... Describe maintenance functions, shutdowns, reboots of a PowerEdge Server." Reference: Dell PowerEdge Foundations v2 Exam Description (D-PE-FN-01), Topic: Maintenance (18%).
NEW QUESTION # 19
What should an administrator consider when adding a hot swap component to a racked server?
- A. Leave the system cover removed for only a short period of time
- B. Reconfigure any attached UPS
- C. Remove the network cables
- D. Disconnect power to the entire rack to ensure personal safety
Answer: A
NEW QUESTION # 20
A server's hard drives are connected to a single controller using a component that provides power and data connections A failure of this component could disconnect multiple drives simultaneously. Which high-speed communication board connects multiple hard drives to a single controller and whose failure can lead to drive disconnections?
- A. Motherboard
- B. RAID Controller
- C. Backplane
- D. PCIe Riser Card
Answer: A
NEW QUESTION # 21
A General Purpose GPU (GPGPU) is commonly installed in Dell EMC PowerEdge servers. Which component does GPGPU complement when processing tasks?
- A. CPU
- B. Network Interface Cards
- C. Memory
- D. iDRAC modules
Answer: A
NEW QUESTION # 22
How can an administrator access a record of alerts in the iDRAC GUI?
- A. System > Overview
- B. Troubleshooting > Lifecycle Log
- C. Maintenance > System Event Log
- D. System > Details
Answer: D
NEW QUESTION # 23
A data center is designed with cold aisle containment. How are cold aisles used in this design to manage server temperatures?
- A. Recirculate hot air within the cold aisle to preheat intake air.
- B. Isolate the cold aisle to prevent any airflow from the hot aisle.
- C. Pump cold air into the cold aisle for server intake.
- D. Direct hot exhaust air from the servers into the cold aisle.
Answer: C
Explanation:
In cold aisle containment designs, cold aisles are used to supply chilled air directly to server intakes by pumping cold air from air handlers or CRAC units into the enclosed cold aisle, ensuring efficient cooling and preventing mixing with hot exhaust air. This isolation improves energy efficiency and maintains optimal server temperatures. Directing hot air into the cold aisle or recirculating it would increase temperatures, defeating the purpose. Containment focuses on separating airflows for better thermal management in PowerEdge server deployments. Exact extract: "Explain the cooling and thermal considerations in PowerEdge Servers (Direct Liquid Cooling, Immersion Cooling, Air Cooling)... Describe maintenance functions, shutdowns, reboots of a PowerEdge Server." Reference: Dell PowerEdge Foundations v2 Exam Description (D-PE-FN-01), Topic: Maintenance (18%).
NEW QUESTION # 24
Where can alerts on the LCD be viewed?
- A. Help > QR Code
- B. Home Screen > Alerts
- C. Quick Sync > QR Code
- D. Settings > Alerts
Answer: B
NEW QUESTION # 25
What is an statement in reference to software RAID?
- A. Software RAID requires a hardware license
- B. Software RAID is an additional cost
- C. Software RAID does not have any data integrity issues
- D. Software RAID uses CPU resources
Answer: D
NEW QUESTION # 26
......
Verified D-PE-FN-01 dumps Q&As - 100% Pass from PrepPDF: https://passcertification.preppdf.com/EMC/D-PE-FN-01-prepaway-exam-dumps.html