Validate your Skills with Updated MB-335 Exam Questions & Answers and Test Engine
Tested & Approved MB-335 Study Materials Download Free Updated 197 Questions
NEW QUESTION # 65
You need to meet the substitution requirements for User4 and User5.
What must you configure? To answer, drag the appropriate configurations to the correct substitution requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A screen shot of a computer Description automatically generated
Topic 5, Adatum CorporationAdatum Corporation is a multi-entity
corporation located in Seattle, Washington in the United States. The
company is a leading producer of specialty cakes and cookies. The
company also manufactures specialty chocolates that use ethically
sourced ingredients from around the world. The company plans to
launch a new product line of organic chocolates later this year.
Adatum plans to implement Dynamics 365 Finance and Dynamics 365 Supply Chain Management to manage financials, inventory, and manufacturing capabilities across the entire organization.
*Manufactured products are stored at the distribution warehouses until they are shipped to customers.
*Individually branded pre-packaged cake and cookie mixes are supplied to specialty cafes and restaurants. The mixes are shipped directly to the cafes and restaurants from the production factories.
*The company maintains a fleet of trucks and also subcontracts shipments between the factories and warehouses to outside vendors.
*The mixes and specialty chocolates are based on standard recipes that use precise ingredient ratios. There are strict rules around ingredient substitutions.
*All mixes use one of three base recipes as their foundation: BaseA, BaseB. and BaseC. Additional ingredients, spices, and flavorings are then added to make the final product.
*BaseA and BaseB are made in large batches and stored until they are used in the other mixes.
*Mixes with BaseA have a shelf life of six months due to the type of flour it uses.
*Specialty chocolates are manufactured only during the holiday season.
*Specialty desserts are offered during the holiday season. This year, customers may specify additional icing colors and cake layers when placing orders. Depending on the popularity of two of the new colors, they may be offered the next year.
*Cocoa oil that is extracted during the production of some of the specialty chocolates is used in the BaseB foundation mix.
*Cleaning and setup of machinery between products has been causing delays in production.
*Prices of raw ingredients such as sugar can fluctuate greatly depending on seasonal and worldwide demand.
*To properly record profitability, ail raw materials use the first in, first out (FIFO) costing method, while finished products are recorded at standard costs.
*Large fluctuations have been occurring at month end in costs reported due to the inability to track production runs that span from month-to-month.
*Leftover flour and sugar from production runs are collected, packaged, and donated to local food banks if the amount is too small to use in other runs.
*To maintain Adatum's certification as a manufacturer of ethically sourced ingredients, the traceability of every ingredient in all products to their source must be tracked.
*All products must be randomly tested for adherence to quality standards for ingredient makeup and weight.
*Similar recipes must be able to be produced in succession to limit machinery cleaning and setup times.
*All costs must be tracked for each production run and be able to be reconciled at the end of the monthly accounting cycle, including any work in process (WIP) costs and donations.
*The organic chocolate line must be set up. The ingredients cannot be mixed with non-organic ingredients in inventory.
*Mixes are generally stored and sold in 16-ounce bags. Some quantities are sold and distributed in 5. 10. and
20-gallon containers to large restaurants.
*Each mix has a single unique item number and is tracked per batch produced.
*Specialty chocolate products must be stored in climate-controlled areas of the warehouse.
*QA TesterA discovers during a random test that the batch of a mix does not contain the necessary amount of IngredientB.
*VendorZ, who transports finished goods from PlantA to Warehouses, is consistently late picking up product.
*OperatorA must consolidate partial mix batch group runs into saleable package quantities.
*UserB must set up the mix items.
*UserC learns that mixes containing BaseA have been stamped with a batch date from the flour vendor and is not being calculated from the mix manufacturing date. The mixes from the past month that might be impacted need to be identified and the calculation needs to be corrected.
*UserD must update the costs of finished goods. Accounting wants labor calculated in WIP based on how much time an individual spends performing the operation, as well as the finished goods to post to a specific different ledger account.
*UserE must set up and maintain the cost of sugar.
*UserF must decrease downtime for the machinery.
*UserG must plan the specialty desserts for the current holiday season.
NEW QUESTION # 66
You are the production supervisor at a chemical processing plant.
You must track attributes for each batch of chemicals. Automated quality orders must be generated when a batch order for these chemicals is reported as finished.
You need to ensure that the values of attributes are updated and tracked.
What three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set up batch attributes.
- B. Assign the attributes to the chemicals.
- C. Assign the attributes to the appropriate test on the test group.
- D. Create a test instrument for each attribute.
- E. Create attribute types.
Answer: A,B,D
NEW QUESTION # 67
You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.
You need to set up a new item for the car audio system.
How should you create the new product? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Product Master
Configuration
Constraint-based configuration
The Constraint-based configuration configuration technology can only be defined if the configuration dimension is the only active dimension on the product dimension group.
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/set-up-maintain-product-configuration-model
NEW QUESTION # 68
A company uses the asset management module in Dynamics 365 Supply Chain Management.
A machine on the shop floor is noisy and emitting and odd smell. The shop floor manager must alert the repair team that the asset might require a repair, or a series of repairs, by one or more specialized repair technicians. All repair records must tie back to the initial investigation records in case of a safety audit.
You need to create components to initiate the process of tracking the requests.
Which three actions should you perform in sequence? To answer. More the appropriate actions from the list of actions to the answer to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Configure maintenance request types.
2 - Create the maintenance request lifecycle states.
3 - Configure a maintenance request model.
NEW QUESTION # 69
You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration
Topic 4, Case Study 4, Fabrikam inc.
Fabrikam, Inc. Is a discrete manufacturer of outdoor patio furniture. The company originated as a sole owner working from a home garage, then moved into a commercial storage space, and later into a full manufacturing facility. The company operates as two operating legal entities, one in the United States and the other in Mexico.
As the company grew, the existing software systems failed to grow with it. This meant that financial reporting was managed in an outdated accounting system; raw materials planning, production, and inventory control were managed in another system; and cost calculations were tracked in multiple spreadsheets managed by analysts.
Current environment
The Fabrikam. inc. engineering team uses a third-party computer-aided design (CAD) system for drawings.
These drawings are later introduced into one or more companies for sale. A customer service center handles complaint calls and places orders for distributors.
The current system landscape creates a lack of controls and visibility across the systems, leading to overages of some raw materials, shortages on others, and large quantities of scrap. Heavy production volume provides little to no room for system downtime. The staff manually creates production orders, which leads to double work for system entry later. This delay has a ripple effect into the materials planning.
The company currently sources teakwood from India, making it a more expensive and high-end material.
Cedar and redwood are both sourced from the Western US. Truck driver shortages across the nation have caused shipping costs to rise sharply.
Fabrikam, Inc. recently decided to expand into the gas firepit market. All products are currently being prototyped. The company decides that the firepit prototype should be initially available only in the United States. The firepits will be manufactured only in Nevada and Arizona. The firepits are produced as prototyping: this production line operates only on Mondays.
Fabrikam, Inc. has purchased new manufacturing equipment for the firepit metal fabrication. This purchase includes a warranty, which requires that the company perform routine maintenance. Fabrikam, inc. elects to complete the maintenance in house on a quarterly schedule and maintain appropriate records for warranty purposes. The metal fabrication equipment consists of three separate machines used in a single production process.
Fabrikam. Inc. made the decision to move to Dynamics 365 Supply Chain Management.
Application and environment
* Fabrikam, inc. must move systems and processing to software as a service (SaaS) whenever possible because the company does not have enough IT staff to support hardware.
Inventory and costing
* Finished goods fall into three categories:
* Wood furniture (teak, cedar, redwood) o Outdoor heating (firepits. gas heaters)
* Each outdoor heating item with slight variations, such as a chrome or steel finish, must have a unique item number, o Repair parts (nuts and bolts, ignitors. and other parts)
* The system must account for the fact that Fabrikam. inc. must take legal ownership of teakwood at the time of shipment, not at the time of receipt into the warehouse.
* The company must accrue for the costs of the teakwood materials as soon as the company takes ownership.
The company takes ownership at the time of shipment, which is posted prior to physical receipt at the warehouse.
Engineering
* Engineers who specialize in gas consumer goods will design the firepits and ate the only users with authority to release the products for sale.
* Engineering must notify customer service of any open orders that may contain a released product version that may be discontinued or delayed.
* The change request workflow must route to the engineer.
Production
* The raw material and subcomponent goods for the firepit must be managed by the engineer. This means the engineer must oversee any new items, material changes, address problems, and so on.
* The metal fabrication equipment must be tracked at the locations where the firepits are produced.
* The production team must operate on an all-day/everyday model, with each team operating in a 12-hour shift. This is a recent change to keep up with high demand for products, as well as for planning a new product line.
* Raw material and subcomponent items for the firepit prototype must not be available for use until engineering is ready for the prototype product release.
* Due to the production staff schedule, all equipment must be planned according to the staffing.
* Maintenance for each of the three pieces of machinery must be scheduled at the same time so that only the local maintenance technician works on the equipment.
* When the firepits are ready for the test market they must made be available for sale.
* The United States operating company must review any engineering products before they are available for sales or production orders,
* The engineering team must release the engineering product into the United States operating company,
* The engineering BOM lines must not be removed by the United States operating company.
Application and environment
* The operations manager is concerned that system downtime is so frequent that It is impacting efficiency due to the all-day/everyday production operation model.
Inventory and costing
* Fabrikam, inc. marketing campaigns in the desert states of Arizona- Nevada, and New Mexico have led to an increased demand for teakwood furniture to endure weather elements. Supply and demand for this wood lowered expected margins with increased shipping costs and price increases from the vendors.
* User1 reports that the inventory value of the teakwood is not on the financial reports, even though ownership of the product begins at the port of shipment,
* Upon receipt into the physical warehouse, User2 reports that the warehouse workers received less teakwood than the ordered amount on the purchase order.
Engineering and production
* As the firepits are produced and feedback received from the test market, records must be maintained of each revision to the firepit design.
* Firepits must have attributes associated with them to specify the type of gas line that is available for the firepit such as natural gas or propane.
* Customer service is receiving calls that the firepit ignition switch does not always work as expected. This issue was reported through an engineering change request.
* User3 reports resource issues on the production shop floor due to system maintenance issues and other delays. The company does not want User3 or the other workers to stop production.
* User4 reports that a bolt needed for cedar wood furniture is out of stock. A temporary substitution bolt was identified prior to starting the production order.
* User5 reports that a hinge for redwood furniture will be discontinued at the end of the year. Production must reflect an updated part.
* A large order was placed for 1,500 pieces of teakwood furniture and production orders must start as soon as possible.
* Users reports the following:
* Only 100 pieces of furniture can be produced on the night shift due to resourcing. Enough raw materials are on hand to complete 100 pieces, but not enough to produce all 1.500 pieces.
* The production floor is organized into dedicated production lines, each with their own warehouse. The warehouse workers must pick the raw materials to the correct warehouse location.
NEW QUESTION # 70
You must ensure that the firepit product is available for sale. How should the product be released?
- A. Connect the BOM to an engineering product version before release.
- B. Connect a route to an engineering version before release.
- C. Release the engineering product version and then assign the route.
- D. Release the engineering product version and then assign BOM.
Answer: A
Explanation:
Topic 5, A. Datum CorporationBackground
A Datum Corporation is a golf cart manufacturing and rental company. The company produces golf carts, converts them to assets, and then rents them out over a period of time. The engineering team continuously seeks to create innovative, sustainable golf carts to stay current in the industry.
Although the company no longer creates gas-powered vehicles, some of its models are still in use as rentals.
A Datum Corporation plans to move from multiple, disconnected systems for each team of employees to a connected platform that uses Dynamics 365 Finance and Dynamics 365 Supply Chain Management.
Current Environment
Employee teams
* A Datum Corporation has four key teams of employees:
o Procurement: A team of buyers who source raw materials for the production of the golf carts.
o Engineering: A team of engineering designers who continuously modify and improve the bill of materials (BOM) for the golf carts.
o Production: A team of production employees, including quality assurance (QA), who manages the BOM costs and work on the shop floor to produce the golf carts o Asset Management: A team that manages the golf cart assets, including maintenance and repairs.
* The company has strict controls and uses engineering change management within its end-to-end operations.
Golf cart models
* All new golf carts are rechargeable electric models.
* The company has three primary golf cart models:
o ModelA is manufactured for commercial customers, such as golf courses. Those golf courses rent ModelA for a fixed period of time.
o ModelA contains subassemblies that are produced by A. Datum Corporation and stored in the warehouse until required for production.
o ModelB is manufactured for consumers and can be rented by vacationers, typically for a weekend.
o ModelB must include turn signals and brake lights to ensure that it is legal to drive on city streets.
o ModelB golf carts are typically stored in a rented parking lot during peak vacation season.
o During the off-season, ModelB is stored in A. Datum Corporation's headquarters warehouse o ModelT units are gas-powered units that have been discontinued for production, however, existing assets are available for rent.
* All models are considered low-speed vehicles and must not exceed 25 mph.
* All golf cart models are owned by A. Datum Corporation. None are owned by commercial customers.
Requirements
Engineering
* The engineering manager plans to phase out production of the current steel frames and replace them with aluminum frames.
* Innovation engineers observe an increase in consumer requests for lifted-style golf carts. ModelB will be used to create a prototype of a newer version.
Production
* Golf cart frames for all models must be configured as subassemblies.
* The engineering team plans for the lift kit shocks and struts to be assembled for the prototype as a single production order for the lift kit finished good. The lift kit will remain at the end of the assembly line for the prototype.
* The QA team must conduct a rigorous set of mandatory tests for the ModelB prototype. Only certified QA team members can complete the checklists. The item will not be available for production until the prototype passes testing.
* The lithium batteries must be installed by a certified technician during production.
* The raw materials used in the prototype model are also sold directly as spare parts.
* The controller requires raw material consumption to be posted in the ledger separately for the prototype production orders.
* The warehouse manager requires that ModelA subassemblies must have putaway work created for the warehouse workers. All other subassemblies and finished goods will not require warehouse work. The lift kit subassembly must have a new standard cost created o Cost Requirement 1: The costs for existing materials are frozen for a period. The incremental costs must be calculated without impacting current frozen costs, o Cost Requirement 2: The incremental cost for the subassembly must be determined based on the raw material purchased parts before it is available as a price.
Asset management
* All electric models can be serviced on a quarterly schedule, which is less frequent than the bimonthly gas-powered models.
* The controller requires ModelB to be repotted separately from other models, and the location of the assets updated at each peak travel season.
* Maintenance technicians run a lean schedule and are fully booked out in advance.
Issues Procurement.
* Buyer 1 leports that the master planning process generated planned purchase orders for steel frame subassemblies. Return orders weie created for the steel frames, which should not have been ordered.
Production
* The production manager reports that the lithium battery installation step is creating a production backup because of two issues:
o Issue 1: Technicians who are not certified are assigned to the battery installation step.
o Issue 2: One certified technician is always on site at the production facility; the other certified technician is on call for repairs to rentals and is only substitutes for other technicians occasionally for production.
Asset management
* A golf course manager reports that multiple ModelT units are frequently slow to start. The golf course manager requests monthly inspections for ModelT units, but the ModelA units can keep their current schedule.
* After the ModelT unit issue was addressed, the golf course manager reports that one of the ModelA units stopped charging. The golf course manager requests a priority repair to be scheduled for the next morning.
NEW QUESTION # 71
You are using the manufacturing execution module in Dynamics 365 Supply Chain Management. License plate labels must be printed for products in the Report as finished step. You need to use the manufacturing execution functionality that meets this requirement. What should you use?
- A. Load planning workbench
- B. Work templates
- C. Job card device
- D. License plates
Answer: C
Explanation:
The manufacturing execution functionality that meets the requirement of printing license plate labels for products in the Report as finished step is License plates. Here is the explanation:
License plates are unique identifiers that are assigned to containers, pallets, or individual items in inventory. License plates can be used to track and manage inventory throughout the warehouse processes, such as receiving, put away, picking, packing, and shipping1. License plates can also be used in production processes, such as reporting as finished and raw material picking2.
To print license plate labels for products in the Report as finished step, you must enable the Generate license plate option on the mobile device menu item that is used for reporting as finished2. You must also set up a document routing layout and a document routing for license plate labels3. When you use the mobile device to report a production order as finished, the system will generate a license plate for the finished product and print a license plate label to the specified printer2. The license plate label can include information such as the item number, batch number, quantity, and barcode of the finished product3.
1: License plates 2: Enable license plate label printing 3: Document routing label layouts
NEW QUESTION # 72
You need to create the production orders for standard model bicycles.
Which method should you use?
- A. Released item
- B. Master planning execution
- C. Sales order line
- D. All production orders form
- E. Supply schedule form
Answer: E
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/supply-schedule
NEW QUESTION # 73
A manufacturing company uses Dynamics 365 Supply Cham Management.
The company identifies a bill of materials (BOM) item that needs to be recalled for a product The engineering department needs to link customer support incidents and knowledgebase articles related to the product change.
Other items affected by this change must reference the same support incidents and knowledgebase articles.
You need to recommend features to facilitate this business process.
Which features should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 74
A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs.
The company has recently seen an increase in demand and purchases another resource that costs more to run.
The company uses the same costs per resource. The company must be able to track cost contributions for the new resource.
You need to create a cost category for the new resource.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Explanation:
NEW QUESTION # 75
You need to set up the chocolate items.
Which values should you select? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
A screenshot of a computer Description automatically generated
NEW QUESTION # 76
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
* Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.
* Create a vendor resource then create a work cell for outsourced painting and add the resource to the work cell.
* Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.
* Create a server term to tie the purchase agreement to the activity.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
The solution does not meet the goal. Here is the explanation:
To create a subcontracting activity for the painting service, you should use the following steps1:
Create a vendor warehouse for the subcontracting vendor. This step is missing in the solution, but it is required to track the inventory that is located at the vendor's site. You need to create a warehouse that is assigned to the vendor account and set it as vendor-managed1.
Create a vendor resource and add it to a new work cell for outsource painting. This step is correct, because you need to create a resource that is assigned to the vendor account and add it to a resource group that represents the subcontracting work cell1. This way, you can assign the subcontracting activity to the vendor resource.
Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity. This step is incorrect, because you need to add the service item (SP-01) as the product of the process activity, not the component to be painted1. The service item represents the subcontracting service that is provided by the vendor. You also need to select the Generate license plate option on the mobile device menu item that is used for reporting as finished1.
Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service. This step is correct, because you need to create a purchase agreement that defines the terms and conditions for purchasing the subcontracting service from the vendor1. You also need to add a purchase agreement line for SP-01 and specify the quantity and price of the service.
Create a server term to tie the purchase agreement to the activity. This step is incorrect, because you need to create a service term that links the purchase agreement line to the production flow process activity1. A service term defines how a service item is consumed in production and how it is invoiced by the vendor.
1: Activity-based subcontracting
NEW QUESTION # 77
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.
A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.
For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.
You need to create and configure the product and pricing for the new speaker.
Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs.
Docs the solution meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation
The solution meets the goal. Here is the explanation:
To create and configure the product and pricing for the new speaker, you should use the following steps1:
Create a product master for the speaker and release it to the relevant legal entities. On the Product dimension groups page, select Constraint-based configuration as the configuration technology, and select the configuration dimension. On the Released product details page, select Configurable on the Engineer tab.
Create a constraint-based product configuration model for the speaker and add it as a version to the product master. On the Constraint-based product configuration model details page, add attributes, constraints, subcomponents, BOM lines, and route operations to define the features and structure of the speaker. For example, you can add an attribute for carbon fiber options and specify Standard and Premium as the values. You can also add constraints to limit the combinations of attribute values that are allowed.
Create a price model for the speaker and link it to the product configuration model. On the Price models page, add price components and specify how they are calculated based on attributes, subcomponents, BOM lines, or route operations. For example, you can add a price component for carbon fiber options and specify different prices for Standard and Premium values. You can also add price components for other attributes that affect the price of the speaker.
Configure products on sales orders, sales quotations, purchase orders, or production orders by using the Product configuration models page. You can select values for attributes and see how they affect the price of the speaker. You can also view the price details and see how each price component contributes to the total price.
1: Product configuration overview : Create constraint-based configuration : Price models
NEW QUESTION # 78
A company uses engineering change management in Dynamics 365 Supply Chain Management. The Product readiness checks feature is turned off.
An existing engineering product must be reconfigured for a new product readiness policy.
You need to change the product readiness policy.
Where should you make this change?
- A. product configuration model
- B. engineering category
- C. shared product
- D. released product
- E. default order settings
Answer: B
Explanation:
* Product readiness policies are assigned to products at the released product level1. A released product is a product that has been released to one or more legal entities and can be used in transactions2.
* To change the product readiness policy for an existing engineering product, you must go to the Product readiness tab on the Released product details page and select a different policy from the Readiness policy field1.
* The other options are not correct, because they are not related to product readiness policies. Default order settings are used to define how a product is ordered, received, and sold2. A shared product is a product that is defined in the shared product master and can be released to multiple legal entities2. An
* engineering category is a category that is used to group engineering products by their characteristics3. A product configuration model is a model that defines the options and rules for configuring a product.
NEW QUESTION # 79
You need to configure the system for plastic operations.
Which two parts should be manually reported as finished? Each correct answer presents part of the solution.
NOTE:Each correct selection is worth one point.
- A. excess plastic
- B. mold tooling
- C. machined plastic pieces
- D. unmachined plastic pieces
Answer: C,D
Explanation:
Topic 2, Fabrikam inc sanitation cleaning solutions
Background
Fabrikam Inc. is a manufacturer of sanitation cleaning solutions and equipment including carpet/floor cleaners, pressure washers, scrubbers and vacuums.
Fabrikam Inc. is a single legal entity based in New York city.
_ Current environment
Products manufactured
* Cleaning equipment
o floor cleaner
o pressure washers
o scrubbers
o vacuums
* Liquid cleaning solutions
o No scent
o Orange scent (subcontracted to a vendor named VendorA)
o Pine scent (subcontracted to a vendor named VendorA)
The production quantity for the finished unscented liquid cleaning solution is 40-liters. IngredientC 'or unscented liquid cleaning solution Is stored in inventory in 50-liter barrels and allocated in 50-liter increments.
Two barrels of IngredientC are uses to produce a barrel of unscented liquid cleaning solution.
Production sites
* The Eastern United States facility manufactures equipment.
* The Western United States facility manufactures liquid cleaning solutions.
* Raw materials and finished products are stocked at the warehouse and distributed from the warehouse.
Warehouse facilities
The warehouse consists of the following zones:
_ Requirements
Cleaning equipment manufacturing
You identify the following require merits for manufacturing cleaning equipment:
* Production is Make to Stock and must be scheduled at an operational level.
* Machine equipment is produced on an assembly line. Scheduling must be based on production orders.
* Finished products must be packaged and shipped directly from the warehouse.
* To reduce delivery times and excess inventory, equipment must be produced as needed.
* The ability to schedule production must be based on resource capacity and the availability of required materials.
* Production order operations must be scheduled to start only when capacity and materials are available at the same time and in the required quantities.
Liquid cleaning solution manufacturing
* Production is Make lo Order and is scheduled at the job level. Products must be manufactured in batches.
* Finished products must be packaged and shipped directly from the warehouse.
* You must be able to calculate the estimated consumption of ingredients and ensure that the amount is divisible by the number of units the raw material is available.
* Formula changes must be reviewed and approved. You must ensure that approved formulas cannot be deleted or edited. Approved formulas may be deactivated.
* An ingredient used to manufacture unscented cleaning solution is defined as a restricted product. You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that includes unscented cleaning solution.
* Production must be scheduled to start by date and time according to the order that is specified by the production route.
* You must implement a scheduled Kanban rule that meets the following requirements:
o Prevent overloading a work cell for scheduled Kanbans.
o Visualize excess inventory in a supermarket.
o Store products in supermarkets before they are consumed or shipped.
* You must link relevant financial dimension data to the inventory transactions at each site to ensure that you can trace profit and loss figures directly to East site and West site respectively.
* You must set up production operations for sub-contracting of Pine scent and Orange scent solution to VendorA to ensure that a purchase order is automatically created based on estimation of a production order.
Costing
* The price of raw materials used for manufacturing unscented cleaning solution must be tracked based upon commodity exchange pricing. The margin and cost multiplier must be set up for commodity traded raw material.
* You must set up cost calculation groups to ensure that indirect costs that originate in the manufacturing of finished goods are recognized and absorbed into the product cost.
* The production manager needs to set up picking list journals and BOM item consumption.
Reporting
* Production control parameters must be setup for reporting of automatic BOM and Route consumption.
* You must create reports that include information about cost records and categories for items, and calculation formulas for indirect costs.
* You must treat manufactured items as purchased items for cost roll-up purposes during BOM calculations and reporting.
* You must configure automatic route consumption in connection with the automatic running of Report as finished.
Inventory control
You must not be required to track the tot number for items when you enter inventory information into the system. Lot numbers for items must be entered when items are picked from inventory.
Issues
Users report the following issues:
* The production manager observes that items are being deducted from inventory two times on production jobs. A shop supervisor mistakenly registers the process for assembling batteries for the pressure washers to Registered as prepared. You must reschedule the process for a future date.
* Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on December 21 to meet the customer's delivery deadline.
* User2 reports that costs for manufactured items are twice as high as expected.
* UserD reports that the formula for the liquid cleaning solution sometimes changes during production. You must enforce the policies regarding formula editing for current and future use.
NEW QUESTION # 80
A company plans to implement routing and route postings.
You must direct positing of route cards based upon the route group at Report as finished. You set the start default order for route posting to Never and the Report as finished to Route Group Dependent.
You set up the route group as shown below.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection it worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 81
You need to configure system attributes.
Which attribute types should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Graphical user interface, text, application, table, email Description automatically generated
NEW QUESTION # 82
A company uses Dynamics 365 Supply Chain Management.
The company wants to use the distributed hybrid topology model to alleviate performance issues at some of its distribution centers. The company has a manufacturing plant, PlantA, which resides at the same physical location as the company home office in FranlFurt Germany.
The company has the following distribution locations:
* Distribution1 covers Ireland.
* Distribute covers the United Kingdom.
* Distribution convers Belgium Germany, and the Netherlands
* Distribution5 covers the Shetland islands.
All distribution warehouses use Dynamic 365 Supply Chain Management to receive and distribute goods from PlantA.
Wherehouse personal use the warehouse app to perform their job function. Because of their proximity to each other, Distribution1, 2, and 3 are managed together and frequently transfer goods between each location.
Due to several connection issues with Dynamic 365 Supply Chain Management, the Shettland islands location struggles to perform tasks.
The company must maintain as little of its own IT infrastructure as possible, especially in remote areas, but still daily activities at all locations.
You need to recommend the appropriate topology configuration.
Which type of scaled should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 83
You need to enable the features and configuration keys for the firepits.
Which two features should you enable? Each answer presents part of the solution.
NOTE: Each correct selection is worth one point
- A. Engineering attributes
- B. Production floor execution management
- C. Engineering change management
- D. Engineering product variants
- E. Change management for process manufacturing
Answer: A,C
Explanation:
Topic 5,
Background
Although the company no longer creates gas-powered vehicles, some of its models are still in use as rentals.
Current Environment
Employee teams
* A. Datum Corporation has four key teams of employees:
o Procurement: A team of buyers who source raw materials for the production of the golf carts.
o Engineering: A team of engineering designers who continuously modify and improve the bill of materials (BOM) for the golf carts.
o Production: A team of production employees, including quality assurance (QA), who manages the BOM costs and work on the shop floor to produce the golf carts o Asset Management: A team that manages the golf cart assets, including maintenance and repairs.
* The company has strict controls and uses engineering change management within its end-to-end operations.
Golf cart models
* All new golf carts are rechargeable electric models.
* The company has three primary golf cart models:
o ModelA is manufactured for commercial customers, such as golf courses. Those golf courses rent ModelA for a fixed period of time.
o ModelA contains subassemblies that are produced by A. Datum Corporation and stored in the warehouse until required for production.
o ModelB is manufactured for consumers and can be rented by vacationers, typically for a weekend.
o ModelB must include turn signals and brake lights to ensure that it is legal to drive on city streets.
o ModelB golf carts are typically stored in a rented parking lot during peak vacation season.
o During the off-season, ModelB is stored in A. Datum Corporation's headquarters warehouse o ModelT units are gas-powered units that have been discontinued for production, however, existing assets are available for rent.
* All models are considered low-speed vehicles and must not exceed 25 mph.
* All golf cart models are owned by A. Datum Corporation. None are owned by commercial customers.
Requirements
Engineering
* The engineering manager plans to phase out production of the current steel frames and replace them with aluminum frames.
* Innovation engineers observe an increase in consumer requests for lifted-style golf carts. ModelB will be used to create a prototype of a newer version.
Production
* Golf cart frames for all models must be configured as subassemblies.
* The engineering team plans for the lift kit shocks and struts to be assembled for the prototype as a single production order for the lift kit finished good. The lift kit will remain at the end of the assembly line for the prototype.
* The QA team must conduct a rigorous set of mandatory tests for the ModelB prototype. Only certified QA team members can complete the checklists. The item will not be available for production until the prototype passes testing.
* The lithium batteries must be installed by a certified technician during production.
* The raw materials used in the prototype model are also sold directly as spare parts.
* The controller requires raw material consumption to be posted in the ledger separately for the prototype production orders.
* The warehouse manager requires that ModelA subassemblies must have putaway work created for the warehouse workers. All other subassemblies and finished goods will not require warehouse work. The lift kit subassembly must have a new standard cost created o Cost Requirement 1: The costs for existing materials are frozen for a period. The incremental costs must be calculated without impacting current frozen costs, o Cost Requirement 2: The incremental cost for the subassembly must be determined based on the raw material purchased parts before it is available as a price.
Asset management
* All electric models can be serviced on a quarterly schedule, which is less frequent than the bimonthly gas-powered models.
* The controller requires ModelB to be repotted separately from other models, and the location of the assets updated at each peak travel season.
* Maintenance technicians run a lean schedule and are fully booked out in advance.
Issues Procurement.
* Buyer 1 leports that the master planning process generated planned purchase orders for steel frame subassemblies. Return orders weie created for the steel frames, which should not have been ordered.
Production
* The production manager reports that the lithium battery installation step is creating a production backup because of two issues:
o Issue 1: Technicians who are not certified are assigned to the battery installation step.
o Issue 2: One certified technician is always on site at the production facility; the other certified technician is on call for repairs to rentals and is only substitutes for other technicians occasionally for production.
Asset management
* A golf course manager reports that multiple ModelT units are frequently slow to start. The golf course manager requests monthly inspections for ModelT units, but the ModelA units can keep their current schedule.
* After the ModelT unit issue was addressed, the golf course manager reports that one of the ModelA units stopped charging. The golf course manager requests a priority repair to be scheduled for the next morning.
NEW QUESTION # 84
A bicycle manufacturer uses Dynamics 365 Supply Chain Management.
The manufacturer experiences a supply chain issue with a metal used to fabricate the wheel. Due to the issue, the manufacturer must change the bicycle wheel assembly temporarily. Production workers require an interactive visual guide to complete production.
You need to configure the features.
Which features should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 85
You need to configure the production requirements of the controller.
What should you configure? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 86
You need to resolve the production manager issue.
How should you configure manufacturing execution? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-production-parameters-in-manufacturing-execution
NEW QUESTION # 87
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.
The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.
You need to ensure that the system is set up to support the manufacturing process.
Solution: Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
No, the solution does not meet the goal. A dimension-based product with configurations is used for discrete manufacturing, not process manufacturing. A price model is used to calculate the cost of different configurations of a product, not the cost of different concentrations of an ingredient. For process manufacturing, you need to use a formula-based product with batch attributes and potency management. A formula defines the materials, ingredients, and outcomes of a specific process. Batch attributes are used to capture the characteristics of a batch of products or ingredients. Potency management is used to adjust the quantity of an ingredient based on its concentration or strength1.
1: Configure formulas for process manufacturing in Dynamics 365 Supply Chain Management - Training | Microsoft Learn
NEW QUESTION # 88
A company makes engine parts used in the automotive industry.
They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Operations to help support the Bill of Materials (BOM) product lifecycle for engineering version control.
You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.
What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.
Answer:
Explanation:
Explanation:
NEW QUESTION # 89
You need to resolve the issue for UserG.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 90
......
Regular Free Updates MB-335 Dumps Real Exam Questions Test Engine: https://passcertification.preppdf.com/Microsoft/MB-335-prepaway-exam-dumps.html