[May-2025] The Best HCIP Transmission Study Guide for the H31-341_V2.5-ENU Exam
H31-341_V2.5-ENU certification guide Q&A from Training Expert PrepPDF
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) exam is a professional-level certification exam offered by Huawei Technologies Co. Ltd. H31-341_V2.5-ENU exam is designed for professionals who have experience in the field of transmission networks and want to demonstrate their expertise in this area. HCIP-Transmission V2.5 certification is intended to validate the abilities of professionals in designing, maintaining, and troubleshooting transmission networks using Huawei products and solutions.
Huawei H31-341_V2.5 exam is a vendor-specific certification exam that is recognized worldwide. HCIP-Transmission V2.5 certification is highly valued among professionals in the transmission engineering field, as it demonstrates their proficiency in using Huawei transmission products and technologies. HCIP-Transmission V2.5 certification is also an excellent way for professionals to advance their careers by demonstrating their expertise in transmission engineering and gaining recognition from their peers and employers.
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) Certification Exam is ideal for professionals who are looking to advance their careers in the field of transmission. HCIP-Transmission V2.5 certification is highly regarded in the industry and is recognized by many organizations around the world. Whether you are a network engineer, a transmission specialist, or a telecommunications professional, this certification can help you demonstrate your expertise and take your career to the next level.
NEW QUESTION # 517
The UITL board belongs to the optical multiplexing and demultiplexing boards. The UITL board realizes the multiplexing and demultiplexing of () GHz interval and () GHz interval signals.
Answer:
Explanation:
50 | 100
NEW QUESTION # 518
Regarding the use of the J0 byte, which of the following statements are correct? (Multiple choice)
- A. The J0 byte can indicate the position of each STM-1 in the STM-N
- B. There is only one J0 byte in the STM-N frame
- C. This byte is used to repeatedly send the segment access point identifier
- D. J0 byte mismatch. Then insert all "1" into the lower signal
Answer: A,B,C
NEW QUESTION # 519
Which of the following belongs to the optical layer part of the OTN frame structure? (Multiple choice)
- A. ODUk
- B. OMS
- C. OPUk
- D. OCh
Answer: B,D
NEW QUESTION # 520
When configuring 1+1 optical line protection, you can choose RI1/T01 or RI2/T02 as the working channel according to the actual situation.
- A. True
- B. False
Answer: B
NEW QUESTION # 521
Which options are wrong in the following description about the ROADM board? (Multiple choice)
- A. WSD9 realizes the dynamic and configurable multiplexing function from any wavelength to any port
- B. RMU9 implements the wave adding function of 9 channels of signals. Its upwave port can cooperate with the OTU single board with wavelength adjustable function to realize full dynamic input of 9 signals
- C. WSM9 realizes the dynamically configurable demultiplexing function from any wavelength to any port
- D. The broadcast function of the RDU9 attack service signal in 9 directions
Answer: A,B,C
NEW QUESTION # 522
The wavelength of the optical monitoring channel used by the ST2 board is? (Multiple choice)
- A. 1491nm
- B. 1511nm
- C. 1510nm
- D. 1471nm
Answer: A,B
NEW QUESTION # 523
In the troubleshooting scenario, which of the following descriptions of the phenomena that may be caused by abnormal optical power is correct? (Multiple choice)
- A. Frequent business interruption
- B. There are a large number of bit errors in the business
- C. No business impact
- D. Business Interruption
Answer: A,B,D
NEW QUESTION # 524
Which of the following descriptions about the delay of store-and-forward devices is wrong?
- A. The first bit of the data frame enters the device to start timing
- B. The last bit of the data frame enters the device to start timing
- C. The first bit of the data frame appears at the output port and ends the timing
- D. Reflect the performance of network equipment, usually not compared with bit forwarding equipment
Answer: A
NEW QUESTION # 525
Which of the following alarms can trigger the 1+1 protection on the client side? (Multiple choice)
- A. ODUk_PM_OCI
- B. ODUk_PM_LCK
- C. OTUk_LOF
- D. ODUk_PM_AIS
Answer: A,B,C,D
NEW QUESTION # 526
By using the out-of-band FEC technology, the optical signal-to-noise ratio budget of the DWDM transmission network can be improved, and the length of the optical transmission section between DWDM transmission network elements can be increased.
- A. True
- B. False
Answer: A
NEW QUESTION # 527
The switching mode of the 1+1 linear multiplex section can be single-ended switching or double-ended switching.
- A. True
- B. False
Answer: A
NEW QUESTION # 528
Which of the following descriptions about the PWE3 network reference model is wrong?
- A. PES establishes a point-to-point channel, the channels are isolated from each other, and the user=layer messages are transparently transmitted between them.
- B. Tunnel is a mechanism for transparently carrying information on the network. It is used to carry P7. A tunnel can only support one PW
- C. CE cannot perceive whether the simulated service or the local service is being used
- D. PE is located at the edge of the operator's network and is a device that provides PWE3 to CE
Answer: B
NEW QUESTION # 529
Which of the following descriptions about the TNF6TTA board is correct? (Multiple choice)
- A. When the service on the client side is GE, the port working mode can be set to ODU0 non-aggregation mode.
- B. When the customer service is 3G-SDI, the port working mode can be set to ODUflex non-aggregation mode.
- C. The total bandwidth is 40 Gbit/s, supporting 20 ODU0, 10 ODU1/ODUflex, and 4 ODU2/ODU2e signals to realize cross-scheduling of services through the backplane bus and the cross-connect board.
- D. When the service on the client side is HD-SDI, the port working mode can be set to ODU1 non-aggregation mode.
- E. When the service on the client side is STM-64, the port working mode can be set to ODU2 non-aggregation mode.
Answer: A,B,C,D,E
NEW QUESTION # 530
The mask of an IP subnet is 28 bits, then the number of hosts in the subnet is?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 531
OChr means use of electrical monitoring techniques
- A. True
- B. False
Answer: A
NEW QUESTION # 532
......
The Best Huawei H31-341_V2.5-ENU Study Guides and Dumps of 2025: https://passcertification.preppdf.com/Huawei/H31-341_V2.5-ENU-prepaway-exam-dumps.html